A water supply valve is required to control the water coming into the appliance if your refrigerator has a water and ice dispenser feature, or even just an installed ice maker. The supply valve is normally found in the rear that is bottom of fridge behind an access panel. The home’s water supply ordinarily travels through copper tubing connected to the valve inlet slot.
The supply valve is an electrically-control component with inlet and socket https://online-brides.net/ water ports and another or maybe more solenoids.
whenever signaled by way of a control board, the solenoid or solenoids will available to enable water to enter an inlet hose which directs water via an optional water filter into the dispenser and/or to an ice maker tray fill tube. In the long run, the solenoids can fail or calcium deposits can develop when you look at the valve producing an obstruction, leading to the ice manufacturer not able to create ice and restricted, or no, water appearing out of the dispenser once the lever is pushed. Since water supply valves may not be effortlessly washed or fixed, a valve that is malfunctioning be changed with a brand new one.
Simple tips to change a faulty water supply valve
- Unplug the power cord that is refrigerator’s.
- Shut from the water supply towards the fridge.
- Pull the ice box out of the wall surface.
- Unthread the screws to eliminate the low access panel that is rear. Bear in mind, you may want to detach the copper tubing or water that is incoming through the inlet valve slot before you can fully eliminate the panel.
- Detach the water that is incoming through the water supply valve inlet slot when you yourself haven’t done so already.
- Unthread the screws to discharge the water supply valve mounting bracket or plate through the fridge framework.
- Disconnect the wire connecter or connecters through the terminals that are solenoid.
- If applicable, slide out any locking clips then depress the keeping rings to detach the socket hose or hoses through the valve ports. Be ready for some water to spill.
- If required, take away the old water supply valve through the mounting dish or bracket.
- Install the water that is new valve by aligning it regarding the mounting dish or bracket if required.
- Completely insert the hose or hoses in to the socket ports and, if needed, slide in the locking clip or videos to secure.
- Link the wire connecter or connecter to your solenoid terminals.
- Position the mounting dish or bracket in the fridge frame and thread the screws to secure.
- Realign the access panel and secure it using the screws.
- Connect the incoming water line towards the valve’s inlet slot. Then use a wrench to tighten if the water is being supplied through copper tubing, hand-thread the tubing’s compression nut onto the inlet port. Avoid overtightening or perhaps you might harm the tubing.
- Move the fridge right right back contrary to the wall surface.
- Turn water supply right back on.
- Plug the power that is refrigerator’s back.
- Switch on the ice manufacturer or run water through the dispenser to verify the brand new supply valve is working correctly and there are not any leakages.
Discover the water that is right valve with fix Clinic
Since water supply valves vary with regards to the ice box model, it is crucial to recognize the valve that is exact fits your ice box. For this, go into the complete model quantity of the applying in the fix Clinic search club, then select “Valve & Float” through the component category filter regarding the remaining region of the page to get the part that is matching. Fix Clinic stocks water supply valves for all the name that is top fridges, including Frigidaire, Whirlpool, Kenmore, Samsung, and LG, but you’ll would you like to make sure you’re purchasing the specific valve that matches your model.